When using an extruder compactor, the custodian must separate the extruded tube of refuse into individual bags. The45K has a unique fluted throat which produces a tube of waste that is easily separated saviing valuable time and labor. The 45KSR provides the same features as the 45K but has a slightly smaller charging chanber and is shorter in length.
- Indexable Hopper rotates iin 90 degree increment
- 45KSR designed for small rooms
- Ram retract switch and emergency stop
- Single or Multi-Bag Operation
- Fire Control and additional roller track (optional)
- Custom Build models for specific operations (optional hand fed hopper)
- Tamper resistant safety switch on access door
- Roller track information below
FEATURES
-
Requires no control panel
-
Can be converted to container packer
-
Fire control (optional)
-
Great versatility
-
Operation can be learned in minutes
-
Ram retract switch: Adjacent to
door
-
Safe - no shearing required
-
Hopper slope 50 degree
Specifications
General Description
Hydraulically
operated compactor utilizing the extrusion principle.
Refuse is forced through the nose of the compactor reducing
volume. 50 degree impact plate reduces noise and blockages.
Large 24" X 24" infeed opening.
Hydraulic System
A
prepackaged power system with components rated at 3000
psi, but operates at a recommended pressure of 1100
psi for longer life and low maintenance.
Electrical
5
hp, 1725 rpm motor, 200-208v, 15 amps, three phase,
four wire, 60 Hz (other voltages on special order).
Furnished with motor starter and 115v control and logic
circuit.
Automatic Shut-off Control
Compactor
automatically shuts off to prevent damage from an oversized
or uncrushable object. Door shut-off switch instantly
shuts off packer when service door is opened.
Automatic Refuse Sensor
Photoelectric
receiver with long-life solid state components starts
compaction cycle when refuse enters hopper and turns
off machine when hopper is empty.
Shipping
Weight
approx. 1550 lbs
|
